Quick Answer: What Is The Most Important Speaker In Surround Sound?

What is the best way to setup a 5.1 surround sound?

5.1 surround sound In a 5.1 system, your surround speakers are best placed to the left and right of your listening position.

Aim them directly towards you for the best sound.

If side placement isn’t practical, place your surround speakers a few feet behind your listening position and face them forward..

Can I mix and match home theater speakers?

Yes. Mixing and matching speaker brands and styles is fine. … This means the Front speakers should be from the same manufacturer and designed to work together. Surround Left and Right speakers should also be identical to each other, as should the Surround Back speakers.

Should I use surround or surround back?

If you have a 5.1 array, your surrounds should be connected to the SURROUND output. You should also make sure you have your receiver setup correctly for the array you have, that is to say surrounds should be set to ON and surround backs should be set to OFF/NO/etc if they are not present.

Should Bass be higher than treble?

To most people, raising both bass and treble will sound better because it makes the speakers sound more powerful, or lots of treble sounds “crystal”.

What level should my surround speakers be?

In a 5-channel system, the side surround speakers should be located 90-110 degrees off-axis. For the best sense of spaciousness, the tweeter height should be about 2 feet above ear level. In a 7.1 system, dedicated rear surround speakers are placed behind the primary seating position for enhanced rear panning effects.

What do surround sound speakers do?

Each of the individual speakers in a surround sound system is essentially responsible for handling the same type of audio in a different way. Depending on where an actor is standing on screen when they deliver a line, the emphasis will be placed on a different channel.

Can I use floor standing speakers for surround sound?

Tower speakers can be used with a modern surround sound system—in fact, they should be. Not exclusively, but a pair of floor standing speakers, augmented by smaller, strategically located speakers, will result in the ideal setup for surround sound.

Can I use front speakers as surround?

While much of this comes down to what type of speakers you have, some are interchangeable. You can use surround speakers as front speakers by swapping out the speakers’ connections in the back of the AV receiver.

How loud should rear surround speakers be?

The rear speakers should equate to the same volume as the other speakers when heard from your regular listening position. When using a test tone, all the speakers should sound equal.

What do channels mean on speakers?

Home Theater Channels Explained. So in short, a channel is a term that refers to sound coming from or going to a single point. Stereo music, for example, is a 2 channel system, meaning it puts out sound to 2 individual speakers, each with its own unique audio output.

What does 0.0 dB mean?

Understanding the “0 dB” Setting Think of 0 dB as maximum volume. For example, if your receiver reads “-25 dB” it means that the volume of the signal has been attenuated by 25 dB (that is, made 25 dB quieter than the loudest it could possibly be) before being output to your speakers.

What speakers do I need for surround sound?

For a proper surround-sound system, you need two to three speakers in front of you and two to three speakers to your sides or behind you. The audio signal is split into multiple channels so that different sound information comes out of the various speakers. The most prominent sounds come out of the front speakers.

Is Dolby or DTS better?

DTS is encoded at a higher bit rate and therefore is considered by some experts to be better quality. Others argue that Dolby Digital’s technology is more advanced, and produces better sound quality at a lower bit rate.

Can I use a 7.2 receiver with 5.1 speakers?

Well yes, a 7.1 AV receiver will be fine to use with this type of speaker system. … When you setup your receiver, it will detect you only have 5.1 speakers connected and will operate as a 5.1 receiver.

Should surround speakers be louder than front?

Ideally, surround speakers should not be louder than front speakers as they are only responsible for helping with background noises, music, and enhancing some of the other sounds in your movie. The dialogue and the main function in the show are handled by the front speakers.

How do I test my surround sound speakers?

First, right-click the speaker icon in your taskbar and select “Sounds” from the menu that pops up. (You can also open the Control Panel and click Hardware and Sound > Sound.) In the window that appears, choose the “Playback” tab, then select the surround sound output device you’d like to test from the list.

What is the best sound mode for surround sound?

If you get a choice of either Dolby Digital surround or DTS, we recommend using DTS. This surround format for either 5 or 7 channels is currently only available on Blu-ray discs. It is the same quality as CD. As such, it offers best surround audio quality currently available.

Should speakers be angled?

Speaker angles Positioning the speakers at a 60-degree angle gives you the best ‘stereo image’ of these sounds. Dust off your old protractor and position the speakers 60 degrees apart. It can help to place a small marker at your listening position and work it out from there.

Can any speaker be used for surround sound?

Can you run a surround sound setup without a center speaker? Yes, you can. You can have any speaker layout you like. In this case, you just need to disable the center speaker in your AV receiver’s setup menu.